Five Common Toilet Cistern Problems

 We all take our toilet cistern for granted and never take the pain to lift the lid to see if any problem is developing. Due to this negligence of our toilet problems come upon us suddenly. We then have to deal with some unwanted cargo in the pan before our breakfast. We dislike a job like this most. Nevertheless, have to, so that our other family members can use the toilet.

Suppose we have a look at the five common toilet cistern problems that we face. In that case, we can easily see that having genuine toilet cistern spares of reputed manufacturers from reliable distributors in the UK we can quickly solve those.

The common toilet cistern problems 

There are many such problems that we face in our toilet. Here we are going to have a look at the five common issues that we face how cistern spares can quickly solve them.

Non-flushing toilet

A non-flushing toilet is the most common toilet problem that we face. The problem can be due to the flush valve or syphon not working properly. One who has faced this problem after using a pan can understand how frustrating it can be. If you are facing such a problem, then you can easily have a flush valve or syphon of reputed make from reliable distributors in the UK.

If you are at the online store of My Toilet Spares, one of the reliable toilet spare parts store in the UK you can easily have flush valves or syphon made by DURAVIT, KAYLA or AMSTD. You can purchase those and have relief from this nature of irritating toilet cistern problem.

Water not filling up 

Water not filling up is another common problem that we face. As the cistern does not fill with water properly, we cannot flush the toilet. All the cisterns that we use have a ball valve, which can be side entry or bottom entry variety. If we see that it is stuck closed, then we can know that it is the reason that the cistern is not filling up with water. Water scales and general wear and tear can be the cause of this problem. Sometimes cleaning can solve the problem, but it may require a replacement if wear and tear is the cause.

You can have ball valve made by SANEUX, IDEAL or JACOB from reputed distributors and solve the problem. It is ideal to purchase genuine spare parts made by the manufacturer who made the cistern to have an effective solution to this problem.

Continuous dripping of water

Many people have insomnia and are not able to sleep, however even if you do not have insomnia, constant dripping water at the cistern can be your cause of sleepless night. A ball valve is again the culprit over here. The water scale or wear and tear may lead to the leakage and make water drip continuously.

So, order ball valve of reputed make from reliable stores to have a solution to this irritating problem.

Continuous running water

You have sometimes noticed that water running continuously even when you have not flushed the toilet. If you have such a cistern, then you will not be able to flush properly and have to deal with unwanted cargo in the pan. A not functioning valve is the cause of this problem. The valve may be stuck if you have a lever-operated cistern or not seat properly if you are using a push-button variety of a cistern. You need to have a new valve and replace the old one.

As always, reputed online stores have ready stock of cistern valves and you can easily order those and have the delivery at your house.

Loose lever or soft button

If there is a flappy lever or a soft button, then you cannot flush the toilet. It is very annoying when you cannot flush after using the toilet. You can buy a lever or soft button and replace it to have a functional cistern.

So, you can see how useful toilet cistern spares can be to solve the common cistern problems that we face. It is ideal to contact My Toilet Spares to have genuine spares of reputed make at an affordable price. Call on 01482 291992 to place your order and have those delivered to your doorsteps.

The Reasons That Require Replacement Of Tap Parts

Water taps made for the use in your home have an exceptionally straightforward, direct development. It assists with knowing the various pieces of the tap in the event that you build up a leak that necessities fixing, or in the event that you plan to replace the tap parts completely using spares from Aqualisa Quartz . While there are various styles, they have the foundation on similar basic ideas.

Handle 

The handle is utilized to turn the tap on to permit the progression of water and to close if off. It might be winged fit as a fiddle or show up fairly like a wagon wheel, contingent upon the style and age of your water tap.

Bonnet Nut 

The bonnet nut screws onto the stem of the tap, giving a spot to connect the handle by means of a little screw.

Stem and Packing 

The stem is the piece of the tap that controls the progression of water by screwing the washer down into the valve seat when in the off position. A packing surrounds it, which keeps it solidly set up, as the name recommends.

Washer 

The washer sits at the base of the stem between it and the valve seat and forestalls spills.

Valve Body and Valve Seat 

This is the place the progression of water has a beginning and an end and is inside the nozzle.

Reasons for leakage requiring a substitution 

Taps and showers are a key piece of a home structure and keeping them in a decent working condition are basic. A cracked tap not just upsets rest and increases the water bill yet additionally motivations a burden that may go from irritating to cataclysmic. The commonplace foundations for a flawed fixture incorporate erosion, mineral store on the inside parts, or inadequate gaskets, o-rings, or washers. Fortunately, property holders can fix most taps that leak in the event that they have the correct apparatuses and some fundamental information on plumbing. Overlooking a broken tap can transform a straightforward fix costing a few pounds. In addition, a trickling tap prompts a misuse of over a hundred gallons of water each month.

Expert agencies uncover that on a normal, leaks can cause right around 10,000 gallons of wastage in a home each year, and this sum is adequate to fill a pool. The most well-known issues of spillage are a dribbling fixture, spillage in latrine flappers, or releasing valves. One can easily fix those having spare parts from reputed manufacturers like Aqualisa Quartz. In any case, among these, a trickling tap or a shower brings about the most noticeable spillage issue; fixing one can spare practically 10% of your water bill.

What makes your Tap Drip? 

There might be a few reasons for why your tap is dribbling. Beneath we survey the absolute most basic reasons for a flawed tap.

An issue in the O-ring

A stem screw has utilization to hold the handle of a tap set up. This stem screw incorporates a little plate connected to it, known as the O-ring. This is a vital place where dribbling can happen. The O-ring can turn out to be free or wear out over standard use, making the tap dribble close to the handle. Supplanting the harmed O-ring will fix it if this is the issue. This issue happens explicitly in cartridge fixtures.

Consumed Valve Seat

A valve seat fills in as an association between the fixture and the spout in the compression system. Amassing of water sediments can cause the valve seat to consume, causing spillage around the spout region. Ensure that you clean the valve seat routinely with the assistance of an expert plumber.

Destroyed Washer

This is one of the most widely recognized causes behind a trickling tap. During every use, the washer is constrained against the valve seat, and this consistent friction makes it wear out. Therefore, you can see trickling around the spout. Trickling brought about by destroyed elastic washers can have repaired by changing the washer. This sort of leak happens in a compression fixture.

Inappropriate Installation of Washer

Regularly, if the washer does not have an appropriate introduction or is not the correct size, it can cause a defective fixture. We recommend contacting an expert plumber to assist you with introducing the spare washer appropriately, permitting you to bid farewell to your leak.

In order to have the best quality spares for your washroom fixtures, you need to depend on My Toilet Spares . Call on 01482 291992 to place your order.You can stay connected with us on  facebook and twitter  pages .

How To Replace Your Fluidmaster Fill Valve Seal

It’s relatively easy to repair a toilet fill valve if you happen to have a Fluidmaster valve. Usually, fixing a fill valve is performed by just substituting the complete fill valve, but Fluidmaster fill valves can be done by just substituting a seal within the unit. If your Fluidmaster fill valve isn’t closing down all the way or not filling fast like it used to be when it was new, then replacing the fill valve seal will most probably sort out the issue.

Not sure how to replace your Fluidmaster Fill Valve Seal? Here is a step-by-step guide:

• Close the water flow to the toilet by rotating the handle on the shutoff valve clockwise until it stops.

• Then flush your toilet to take off most of the water present in the tank

• Untie the plastic lid located on zenith of the fill valve: enfold one hand around the fill valve tube, then slide it to thrust the float cup up towards the summit of the fill valve, and grab the shaft steadfastly. Make use of your other hand to rotate the lid on summit of the fill valve counterclockwise 1/8 of a turn. It may aid to push down on the lid while rotating.

• Elevate the lid from the crown of the valve & put to one side.

• Put a mug upside down over the top of the valve & keep it in place with one hand.

• Make use of your other hand to cautiously open the shutoff valve by rotating it counterclockwise. Waters will stream out of the fill valve, into the mug, and then down into the toilet tank. This will flush away any wreckage from the valve. Close the shutoff valve by turning clockwise until it stops.

• Take off the existing fill valve from the valve lid.
• Fit the new valve seal, placing the nipple on the seal over the steel needle in the lid so the nipples goes up into the cap; this must match the placement of the existing seal.
• Install the fill valve cap again by fitting it onto the valve as before and rotating 1/8 clockwise to lock the lit in position.
• Slowly open the shutoff valve by rotating counterclockwise until the handle stops.

To conclude the task, allow the valve to refill the toilet tank, and then flush the toilet & check out the operation of the fill valve. Also check if there’s any leak at the shutoff valve.

My Toilet Spares is your one-stop online shop if you are looking for high quality Fluidmaster Fill Valve and other related spare parts. Check out our website now to choose from a wide range of Fluidmaster brand toilet spare parts. For more information you can stay connected with us on our facebook , twitter  and google+ pages .

5 Useful Tips to Replace Broken Cistern Levers

Improperly tightened cistern levels or handles are the common cause of flushing problems with toilets. Check whether your toilet is flushing completely and also see if you have a loose toilet handle. If it’s loose, you can tighten it easily with the help of an adjustable wrench.

Does your toilet run continuously? If yes, then make sure your toilet handle isn’t so tight. Again, if the nut on the toilet handle is too tight, the handle arm won’t fall into the resting position after flushing.

You need to make sure the handle has enough space to allow the arm to move freely. Tightened handles can be loosened using an adjustable wrench. If the toilet handle is broken, it will prevent the toilet from running and need a replacement.

If a toilet flush handle is badly worn, it looks unsightly and can be unhygienic. The cracks collect germs and become tough to clean properly. Replacing this flush handle will give your toilet a refreshing look. But how do you replace broken cistern levers?

Tip-1

Unscrew the retaining screw.

First remove the cistern lid and keep it aside in a safe place. You will need to unscrew the retaining screw on the syphon actuation lever – the back of the toilet flush handle and unhook the wire connector precisely.

Tip-2

Remove the plastic retaining nut. 

To remove the plastic retaining nut, you need to hold the handle in one hand. You should use an adjustable wrench to remove the plastic retaining nut.

Tip-3

Remove the handle.

You should remove the broken flush handle, lever, and wire connector to replace them with the new one.

Tip-4

Install a new handle. 

You should hook the wire connector onto the cistern lever and pull it slightly upward direction to tension the syphoning mechanism. You need to insert a new handle through the toilet and hold the handle at the right flush syphons starting position while pushing the square axle into the lever. After that, you need to tighten the lever retaining screw and handle retaining nut.

Tip – 5

Check the new handle.

Replace the cistern lid. You need to check whether the toilet flushes perfectly. You should inspect the handle and find out whether it’s in the right position.

Conclusion –

Looking to buy cistern spares online? Choose no other than My Toilet Spares. Sometimes you may be quite unsure what type of cistern levers will be ideal for your toilet or perhaps you have an older toilet whose original flush lever has been stopped working.

Check out the available cistern handles, cistern lids, cistern levers at My Toilet Spares and make the selection that specifically fit your toilets at the best. For more information you can stay connected with us on our facebook , twitter  and google+ pages .