How To Replace Your Fluidmaster Fill Valve Seal

It’s relatively easy to repair a toilet fill valve if you happen to have a Fluidmaster valve. Usually, fixing a fill valve is performed by just substituting the complete fill valve, but Fluidmaster fill valves can be done by just substituting a seal within the unit. If your Fluidmaster fill valve isn’t closing down all the way or not filling fast like it used to be when it was new, then replacing the fill valve seal will most probably sort out the issue.

Not sure how to replace your Fluidmaster Fill Valve Seal? Here is a step-by-step guide:

• Close the water flow to the toilet by rotating the handle on the shutoff valve clockwise until it stops.

• Then flush your toilet to take off most of the water present in the tank

• Untie the plastic lid located on zenith of the fill valve: enfold one hand around the fill valve tube, then slide it to thrust the float cup up towards the summit of the fill valve, and grab the shaft steadfastly. Make use of your other hand to rotate the lid on summit of the fill valve counterclockwise 1/8 of a turn. It may aid to push down on the lid while rotating.

• Elevate the lid from the crown of the valve & put to one side.

• Put a mug upside down over the top of the valve & keep it in place with one hand.

• Make use of your other hand to cautiously open the shutoff valve by rotating it counterclockwise. Waters will stream out of the fill valve, into the mug, and then down into the toilet tank. This will flush away any wreckage from the valve. Close the shutoff valve by turning clockwise until it stops.

• Take off the existing fill valve from the valve lid.
• Fit the new valve seal, placing the nipple on the seal over the steel needle in the lid so the nipples goes up into the cap; this must match the placement of the existing seal.
• Install the fill valve cap again by fitting it onto the valve as before and rotating 1/8 clockwise to lock the lit in position.
• Slowly open the shutoff valve by rotating counterclockwise until the handle stops.

To conclude the task, allow the valve to refill the toilet tank, and then flush the toilet & check out the operation of the fill valve. Also check if there’s any leak at the shutoff valve.

My Toilet Spares is your one-stop online shop if you are looking for high quality Fluidmaster Fill Valve and other related spare parts. Check out our website now to choose from a wide range of Fluidmaster brand toilet spare parts. For more information you can stay connected with us on our facebook , twitter  and google+ pages .

Flush Syphons Help Proper Functioning Of Toilet Flush

Usually we get annoyed and frustrated when the toilet flush does not function properly and we keep on spending hours and days in pushing on the handle resulting nothing! But there is a simple solution to that i.e. a toilet flush syphon.

Syphon is a type of flush valve that operates as an internal plunger which means when you press the handle the syphon pushes water up and down within the syphon tube using a one way diaphragm.

Then the water passes through a folding diaphragm washer before passing over the outlet of the syphon. This in turn helps the syphon suck more water from the cistern. From here the gravity takes over and continues drawing out remaining water until the cistern empties completely. Once the cistern is emptied the syphon breaks.

Features of toilets with flush syphons:

• Water surface area is larger
• Water level is high in bowl
• Trap way is long and narrow with a S-shape
• Bowl base is Longer

Advantages of toilets with flush syphons:

• Cleaner bowl with lesser possibility of skid spots
• Powerful yet quieter flush
• Saves water with lesser consumption
• Free from odors

Disadvantage of Toilets with Flush Syphons:

• Bigger in size

Conclusion:

If you are looking for high quality and durable flush syphons from a genuine and reputed dealer then MTS is the best choice for you. For more information you can stay connected with us on our facebook , twitter  and google+ pages .

5 Useful Tips to Replace Broken Cistern Levers

Improperly tightened cistern levels or handles are the common cause of flushing problems with toilets. Check whether your toilet is flushing completely and also see if you have a loose toilet handle. If it’s loose, you can tighten it easily with the help of an adjustable wrench.

Does your toilet run continuously? If yes, then make sure your toilet handle isn’t so tight. Again, if the nut on the toilet handle is too tight, the handle arm won’t fall into the resting position after flushing.

You need to make sure the handle has enough space to allow the arm to move freely. Tightened handles can be loosened using an adjustable wrench. If the toilet handle is broken, it will prevent the toilet from running and need a replacement.

If a toilet flush handle is badly worn, it looks unsightly and can be unhygienic. The cracks collect germs and become tough to clean properly. Replacing this flush handle will give your toilet a refreshing look. But how do you replace broken cistern levers?

Tip-1

Unscrew the retaining screw.

First remove the cistern lid and keep it aside in a safe place. You will need to unscrew the retaining screw on the syphon actuation lever – the back of the toilet flush handle and unhook the wire connector precisely.

Tip-2

Remove the plastic retaining nut. 

To remove the plastic retaining nut, you need to hold the handle in one hand. You should use an adjustable wrench to remove the plastic retaining nut.

Tip-3

Remove the handle.

You should remove the broken flush handle, lever, and wire connector to replace them with the new one.

Tip-4

Install a new handle. 

You should hook the wire connector onto the cistern lever and pull it slightly upward direction to tension the syphoning mechanism. You need to insert a new handle through the toilet and hold the handle at the right flush syphons starting position while pushing the square axle into the lever. After that, you need to tighten the lever retaining screw and handle retaining nut.

Tip – 5

Check the new handle.

Replace the cistern lid. You need to check whether the toilet flushes perfectly. You should inspect the handle and find out whether it’s in the right position.

Conclusion –

Looking to buy cistern spares online? Choose no other than My Toilet Spares. Sometimes you may be quite unsure what type of cistern levers will be ideal for your toilet or perhaps you have an older toilet whose original flush lever has been stopped working.

Check out the available cistern handles, cistern lids, cistern levers at My Toilet Spares and make the selection that specifically fit your toilets at the best. For more information you can stay connected with us on our facebook , twitter  and google+ pages .