Sometimes water may be found on the floor around the base of your toilet. Is it happening in your bathroom? If yes, then it is not at all a good sign! It signifies there is a leak in your toilet! It probably happens around the base of the main unit. Rather than letting your bathroom become a pool, bring your dependable tool & start fixing that leak.
Their Might Be Loose Tee Bolts:
Do you have any idea about those plastic covers around your toilet’s base? Those caps are covering tee bolts that help hold your toilet strongly in position. When these bolts are broken or loose, the seal can break down, prompting leakages to happen. Reposition your toilet so it’s levelled & centred, and start tightening the bolts. If the bolts persist to rotate freely or are busted, head to your nearby hardware store to buy a replacement set.
It has a damaged wax ring:
You have assessed the state of your tee bolts & have tried tightening them, but your toilet is still leaking at the base. The wax ring is most probably to blame & will have to be replaced. Go to your nearby hardware store and buy yourself a new wax ring for the toilet. You can even order it from My Toilet Store.
Make the toilet Ready:
Shut the water to your toilet through the water valve. It is found at the back of your toilet. Then you can flush the toilet to take off as much of the sitting water as you can. To take off any standing water, unscrew the nut holding the fill valve in place & gather the excess water with a small bucket. Finally, take off any standing water from your toilet’s base by plunging it for a few seconds.
Take off the toilet and old wax ring:
Unscrew the water supply line from your toilet. Take off the tee bolts from the floor. Now the toilet will be ready to be lifted & detached from its normal position. Get the toilet down on its side & start taking off the old wax ring. Ensure you take off any dried-on wax & leftover before fitting the new wax ring.
Install the new wax ring:
Take your new wax ring & put it over the flange with the tee bolts fastened in position. With the new wax ring in position, relocate your toilet back to its normal placement.
Reinstall your toilet
Ensure the toilet is installed in the correct position. Start using your body weight to push it into the wax ring to create the new seal. Screw tee bolts into place, remembering that the toilet should be centred & levelled correctly. Reconnect your water line. Turn the valve back on, and give it a flush. Now closely check your toilet to find out if any water leaks from the new seal.
If you wish to buy a genuine toilet seat for your toilet then look no further than My Toilet Spares. They stock a wide range of toilet seat spares for customers’ convenience.
No comments:
Post a Comment